Please Read: Significant Update Planned, Migrating Forum Software This Month

See more
See less

PIX FIREWALL 515 problem i am can't open the web site

  • Filter
  • Time
  • Show
Clear All
new posts

  • PIX FIREWALL 515 problem i am can't open the web site

    test configuration
    local ip add add) address)

    name if ethernet0 outside security0
    name if ethernet1 inside security100
    enable password <REMOVED> encrypted
    passwd <REMOVED> encrypted
    hostname pixfirewall
    fixup protocol ftp 21
    fixup protocol http 80
    fixup protocol h323 1720
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol sip 5060
    fixup protocol skinny 2000
    access-list acl_in permit ip host any
    access-list acl_out permit icmp any any
    interface ethernet0 auto
    interface ethernet1 auto
    mtu outside 1500
    mtu inside 1500
    ip address outside
    ip address inside
    global (outside) 1
    nat (inside) 1 0 0
    access-group acl_out in interface outside
    access-group acl_in in interface inside
    route outside 1
    route inside 1

    please send e-mail to <REMOVED>
    Last edited by Wired; 27th April 2011, 05:45.

  • #2
    Re: PIX FIREWALL 515 problem i am can't open the web site

    1. Please don't post on a forum and ask for an email response. The beginning, middle, and end of an issue should all be in the same place for others to help out and learn from. Your email address has been removed from the post so you don't get spam.

    2. Could you be a bit more specific on what your issue is, how it presents itself, and what you've done to troubleshoot so far?

    3. /sigh ... removed PASSWORDS...
    ** Remember to give credit where credit is due and leave reputation points where appropriate **