Announcement

Collapse
No announcement yet.

PIX 501 reverting to an ftp server when uplugged

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • PIX 501 reverting to an ftp server when uplugged

    Hello all
    A am new here and I did do a search and could not find any problems similar to mine, I hope you can help
    My problem is that after my company's PIX 501 is unplugged after for a night or two when the firewall is plug back in it goes to an ftp server configuration with a monitor prompt Unplugging it returns it to the setup of the saved configuration. Yes, I have replaced the battery and it is turned off when we are done with testing the configration(we are using a 501 for two reasons; one it was cheap, two this is the companies first firewall and the boss wanted something to explore what a firewall would do for the company). My question is why is it going to the ftp configuration and how messed up is this PIX 501? (Note this was an unopened box from another company this firewall was never in service

  • #2
    Re: PIX 501 reverting to an ftp server when uplugged

    Post the clean config. Sounds like it trying to load the config via tftp.
    CCNA, Network+

    Comment

    Working...
    X