Please Read: Significant Update Planned, Migrating Forum Software This Month

See more
See less

Static Routes

  • Filter
  • Time
  • Show
Clear All
new posts

  • Static Routes

    Hello I have a asa 5510 and routing problems.

    The inside network is
    The asa is and the default gateway for this network.

    I have a remote network to access the 44.0/24 subnet i have a second gateway

    Now i created a static rule on the inside interface
    I get problems with syc en ack packages, i added the option:
    same-security-traffic permit intra-interface

    i cannot connect to the 44.0/24 subnet, what can i do i have no layer 3 switch, and the router is a managed router and the want to create a static route.

    Who can help me.

  • #2
    Re: Static Routes

    Give this a try:
    route inside 1
    And remove the static route.
    CCNA, Network+


    • #3
      Re: Static Routes

      I mean a static route and not a rule

      i had created the static route.


      • #4
        Re: Static Routes

        Is the router upstream from the asa? A diagram would be helpfull. Why is the inside interface on the same subnet as the other router? Typically a packet cant come in an interface on teh ASA and go out the same interface. Please post a descriptive diagram etc with configs.
        Last edited by auglan; 1st July 2010, 15:50.
        CCNA, CCNA-Security, CCNP
        CCIE Security (In Progress)