Announcement

Collapse
No announcement yet.

ASA 5110 config...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ASA 5110 config...

    HI There,

    Need to config ASA 5510 Ver 8.0(2)....Below is the setup..

    Code:
    Internet(MPLS) <->router01<-->asa5510<-->LAN-01(172.20.16.0/24)
                                      | 
                                      |
                                      |
                               Layer 3 switch-----PIX-----Router-----Intenet
                                      |
                                      |
                                     LAN(AD/DNS/DHCP)192.168.0.0/24
    LAN-1 basically for voice(SIP),Please somebody help to configure asa5510, The rest are already in place.
    The requirement, 1) I hope the OUTSIDE to be connected to the router01. 2) DMZ to be connected to Layer3. 3)Inside to Outside should NAT. 4) Inside to DMZ to route(Nonat). 5) Internet traffic to go through Layer3. 6) no traffic from DMZ to outside...

    Thanks in advance...
    Last edited by mpbraj; 25th March 2010, 13:25.
Working...
X