Announcement

Collapse
No announcement yet.

ACL for multiple VLans

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ACL for multiple VLans

    I have a question in regards to ACL for a VLAN ID. I need to filter all traffic besides port 80 (TCP) and port 443 (TCP) and port 53 (UDP) to the gateway. This VLAN 10 needs to get the default gateway 10.1.1.2
    How would I configure an ACL to accomplish this task?
    VLAN ID(s):
    vlan1 10.1.1.0/24
    vlan2 10.1.2.0/24
    vlan3 10.1.3.0/24
    vlan4 10.1.4.0/24
    vlan5 10.1.5.0/24
    vlan6 10.1.6.0/24
    vlan7 10.1.7.0/24
    vlan8 10.1.8.0/24
    vlan9 10.1.9.0/24
    vlan10 10.1.10.0/24
    vlan200 10.1.200.0/24
    I would greatly appreciate any insight to this question
    --Jason

  • #2
    Re: ACL for multiple VLans

    I figured it out.

    Comment


    • #3
      Re: ACL for multiple VLans

      Perhaps you could post your findings for the benefit of anyone else looking into this?
      Gareth Howells

      BSc (Hons), MBCS, MCP, MCDST, ICCE

      Any advice is given in good faith and without warranty.

      Please give reputation points if somebody has helped you.

      "For by now I could have stretched out my hand and struck you and your people with a plague that would have wiped you off the Earth." (Exodus 9:15) - I could kill you with my thumb.

      "Everything that lives and moves will be food for you." (Genesis 9:3) - For every animal you don't eat, I'm going to eat three.

      Comment

      Working...
      X