No announcement yet.

setting up VPN with ASA5505 and SBS 2003

  • Filter
  • Time
  • Show
Clear All
new posts

  • setting up VPN with ASA5505 and SBS 2003

    Let me preface this by saying that I am not great with Cisco, I am much more comfortable in the MS server environment but I inherited this setup and am trying to figure it out best I can.

    Basically, I am trying to setup a VPN and use my DC as a RADIUS server. Below is my running config (I used the Cisco VPN wizard to attempt to setup the VPN). On my server I got IAS with a remote access policy allowing VPN access when 'NAS-port type match Virtual VPN" and the user is part of the VPN security group.

    Here is run config, i changed public IP's, domain name and passwords out of paronia, lol.

    : Saved
    : Written by enable_15 at 11:39:33.231 UTC Thu Apr 2 2009
    ASA Version 7.2(2)
    hostname ciscoasa
    domain-name companyXYZ.local
    enable password AvFxOc5r.eXgcyRR encrypted
    name DC101 description AD/WWW/Mail
    name mail
    interface Vlan1
    nameif inside
    security-level 100
    ip address
    interface Vlan2
    nameif outside
    security-level 0
    ip address
    interface Vlan3
    no forward interface Vlan1
    nameif dmz
    security-level 50
    no ip address
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    passwd AvFxOc5r.eXgcyRR encrypted
    ftp mode passive
    dns server-group DefaultDNS
    domain-name companyXYZ.local
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object-group service VNC tcp
    port-object range 5900 5900
    object-group service RDP tcp
    description Microsoft Terminal Services
    port-object range 3389 3389
    access-list acl_out extended permit icmp any any
    access-list acl_out remark SMTP mail access
    access-list acl_out extended permit tcp any host mail eq smtp
    access-list acl_out remark VNC remote desktop access
    access-list acl_out extended permit tcp any host mail eq 5900
    access-list acl_out remark web access
    access-list acl_out extended permit tcp any host mail eq www
    access-list acl_out remark secure web access
    access-list acl_out extended permit tcp any host mail eq https
    access-list acl_out remark pop3 mail access
    access-list acl_out extended permit tcp any host mail eq pop3
    access-list acl_out remark Microsoft Terminal Services Access
    access-list acl_out extended permit tcp any host mail object-group RDP
    access-list acl_out extended permit tcp any host mail eq imap4
    access-list inside_nat0_outbound extended permit ip any
    access-list 110 extended permit tcp host mail host DC101 eq 3389
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu dmz 1500
    ip local pool company-vpn mask
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-522.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1
    static (inside,outside) mail DC101 netmask
    access-group acl_out in interface outside
    route outside 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server DC101 protocol nt
    aaa-server DC101 host DC101
    timeout 5
    nt-auth-domain-controller DC101
    group-policy company-vpn internal
    group-policy company-vpn attributes
    dns-server value
    vpn-tunnel-protocol IPSec
    default-domain value companyXYZ.local
    http server enable
    http inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto dynamic-map outside_dyn_map 20 set pfs
    crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
    crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh outside
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address DC101- inside

    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    message-length maximum 512
    policy-map global_policy
    class inspection_default
    inspect dns preset_dns_map
    inspect ftp
    inspect h323 h225
    inspect h323 ras
    inspect rsh
    inspect rtsp
    inspect esmtp
    inspect sqlnet
    inspect skinny
    inspect sunrpc
    inspect xdmcp
    inspect sip
    inspect netbios
    inspect tftp
    service-policy global_policy global
    prompt hostname context
    : end

  • #2
    Re: setting up VPN with ASA5505 and SBS 2003

    Do you get errors in the event log?
    What happens when you try and authenticate?

    Please read this before you post:

    Quis custodiet ipsos custodes?


    • #3
      Re: setting up VPN with ASA5505 and SBS 2003


      Your configuration is missing a few crucial lines
      The following links should help you:

      hxxp:// ml