Announcement

Collapse
No announcement yet.

ASA 5510 Inbound to Outbound Internet Does Not Work After Following Setup Wizard

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ASA 5510 Inbound to Outbound Internet Does Not Work After Following Setup Wizard

    Once you go through the wizard for the ASA 5510 firewall and do the basic setup, how do you get internal to external connectivity working. I would like to make sure that all computers on the internal interface of the firewall be able to access the internet. It looks like by default internal machines cannot connect to the External interface of the firewall. There is no DMZ, I just need to know how to enable this using ASDM 5.0.

    Thanks in advance!

  • #2
    Re: ASA 5510 Inbound to Outbound Internet Does Not Work After Following Setup Wizard

    I've never really used asdm but if you're interested in using the command line then I can give it a go?

    There are a few links here
    http://www.cisco.com/en/US/products/...ides_list.html
    Last edited by AndyJG247; 9th November 2008, 11:15.
    cheers
    Andy

    Please read this before you post:


    Quis custodiet ipsos custodes?

    Comment


    • #3
      Re: ASA 5510 Inbound to Outbound Internet Does Not Work After Following Setup Wizard

      moved to cisco security.
      Marcel
      Technical Consultant
      Netherlands
      http://www.phetios.com
      http://blog.nessus.nl

      MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
      "No matter how secure, there is always the human factor."

      "Enjoy life today, tomorrow may never come."
      "If you're going through hell, keep going. ~Winston Churchill"

      Comment

      Working...
      X