Announcement

Collapse
No announcement yet.

OSPF on standby ASA

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • OSPF on standby ASA

    Hi, I have ASA 5520 configured in Active/standby mode. These boxes are connected to two Cisco 3800 series routers. The OSPF is configured here to auto divert the traffic on these routers.
    On my Active box the ospf is working fine. But at the same time my standby box is unable to establish ospf neighbourship.
    Does it possible to have same ospf on both standby and Active boxes?

    Kindly suggest.
    ThankX in advance.

  • #2
    Re: OSPF on standby ASA

    Which version of the software?
    I read some notes on the internet about this could be an issue with 7.2 although the cisco documention seems te be removed.
    (for example over here: http://www.velocityreviews.com/forum...pf-routes.html)
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment


    • #3
      Re: OSPF on standby ASA

      ASA Version 7.2(3)

      Comment


      • #4
        Re: OSPF on standby ASA

        You might try an higher version.
        Marcel
        Technical Consultant
        Netherlands
        http://www.phetios.com
        http://blog.nessus.nl

        MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
        "No matter how secure, there is always the human factor."

        "Enjoy life today, tomorrow may never come."
        "If you're going through hell, keep going. ~Winston Churchill"

        Comment


        • #5
          Re: OSPF on standby ASA

          I had tried with the upgraded version.
          But no use.

          Comment

          Working...
          X