No announcement yet.

cisco 5510 - 5505 Site to Site

  • Filter
  • Time
  • Show
Clear All
new posts

  • cisco 5510 - 5505 Site to Site


    i've tried configuring these for a site to site but of course can NOT get this working.
    i'm using the ASDM interface to do this.... i have the PDF from Cisco on both units.

    the very first item to enter is the Peer network... this is of course the Remote Network IP... then i enter the key name 'ciscoxx' for example.
    next is the Tunnel Group Name. this has to be the same on both devices ...same as the Key name. correct?

    next i select the encryption method... use 3DES,etc.

    now the next part is the Hosts and Networks...

    do i enter the local internal IP numbers...for example
    remote would be the remote WAN IP number.
    and select 'Protect'