Announcement

Collapse
No announcement yet.

Crossing 2 vpns...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crossing 2 vpns...

    Hi,
    I have a site-site VPN between site A and site B and another between site B and site C. Routing in general is working ok and access between site A and B & B and C is fine. Site A has 10.0.0.0/24, site B has 10.10.0.0/24 and site C uses 10.100.0.0/24.

    The VPN connections are all terminating at Cisco ASAs. My problem is that I need to allow access from servers in site A to servers in site C. I am not sure how to do this.
    Is it a routing entry or maybe a change to the protected networks to tell the firewall to send the traffic accross the VPN.

    If anyone has any thoughts on this it would be great, it is driving me crazy and I can't find any info about it. I also can't experiment too much as it is a live network.

    Thanks,

    Joe

  • #2
    Re: Crossing 2 vpns...

    First of all ASA A should know he can find subnet of C via ASA B.
    So in first place you need to setup routing correctly.

    Also you should create ACL's for it.
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment

    Working...
    X