Announcement

Collapse
No announcement yet.

1921 Router with Verizon HWIC, 2960 Switch

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1921 Router with Verizon HWIC, 2960 Switch

    Good Morning,
    With the attached configurations I am able to ping the internet from the router but cannot ping the router or the internet from the switch.

    The desired result is as follows.
    Router:
    GE0/0 Primary WAN with provided DHCP address.
    GE0/1 LAN port to GE0/1 of 2960 Switch
    Celluar 0/0/0 Always on WAN backup.
    Attached Files

  • #2
    Re: 1921 Router with Verizon HWIC, 2960 Switch

    The error message is very clear:
    Code:
    % Invalid source address- IP address not on any of our up interfaces
    You need to make sure the VLAN interfaces on the switch are active.

    You posted only a partial switch configuration, so it's hard to say if there are any other configuration issues. Make sure the trunk interface connected to GigabitEthernet0/1 on the router is manually configured to operate in "trunk" mode. "Auto" will not work.

    Comment

    Working...
    X