Announcement

Collapse
No announcement yet.

Cisco 877 Multiple IPSec Tunnels

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco 877 Multiple IPSec Tunnels

    Hey guys

    I'm trying to bring up two ipsec tunnels on a Cisco 877. I've not done multiple tunnels to Cisco router before, so if an awesome individual could please review my syntax to confirm if this is the correct way to have multiple tunnels that would be great!

    Code:
    crypto isakmp policy 15
     encr aes
     authentication pre-share
     group 2
    crypto isakmp key sharedkey address 1.1.1.1
    crypto isakmp key sharedkey2 address 1.1.1.2
    !
    crypto ipsec transform-set aes128 esp-aes esp-sha-hmac 
    !
    crypto map cmap 1 ipsec-isakmp 
     set peer 1.1.1.1
     set transform-set aes128 
     match address 160
    !
    cyrpto map cmap 2 ipsec-isakmp
     set peer 1.1.1.2
     set transform-set aes128
     matach address 161
    ! 
    interface Dialer0
     crypto map cmap
     crypto ipsec df-bit clear

  • #2
    Re: Cisco 877 Multiple IPSec Tunnels

    Syntax looks good. I see the Proxy ACL's matched in your crypto map but I cant see them in the config so I assume they are there. I also assume you have a default route out your dialer interface.
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)

    Comment


    • #3
      Re: Cisco 877 Multiple IPSec Tunnels

      Yea I've left out a lot of the config, as I'm just concerned with the syntax of sequenced crypto maps..

      Thanks for your assistant.

      Comment

      Working...
      X