Announcement

Collapse
No announcement yet.

Cisco 1800 Series, I cant get in the Rommon mod!!!!!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco 1800 Series, I cant get in the Rommon mod!!!!!!

    I am doing exactly as everyone is saying hitting cntrl + break
    when i am starting up my router, but i cant get in the Rommon Mode

    I did this a 1000 times now i also followed all the guides on the internet but it does not help

    I need this becouse i just have buyed this router end it is encrypted!
    i need to get in the rommon mode so i can reset everything

    When i am looking in my Terminal i also see this:

    (Password recovery functionality is disabeled)

    I need to reset that password and login name

    If you guys know a other way pleas tell me.....

    I am shure that i am doing something wrong

  • #2
    Re: Cisco 1800 Series, I cant get in the Rommon mod!!!!!!

    Can try this link:


    http://www.cisco.com/en/US/products/...801d8113.shtml



    If a router is configured with the no service password-recovery command, this disables all access to the ROMMON. If there is no valid Cisco IOS software image in the Flash memory of the router, the user is not able to use the ROMMON XMODEM command in order to load a new Flash image. In order to fix the router, you must get a new Cisco IOS software image on a Flash SIMM, or on a PCMCIA card, for example on the 3600 Series Routers.

    In order to minimize this risk, a customer who uses ROMMON security must also use dual Flash bank memory and put a backup Cisco IOS software image in a separate partition.
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)

    Comment


    • #3
      Re: Cisco 1800 Series, I cant get in the Rommon mod!!!!!!

      And if were a hacker how wud i crack that thing lol?

      How do hackers crack this than?

      Comment


      • #4
        Re: Cisco 1800 Series, I cant get in the Rommon mod!!!!!!

        You cant, hence the description I gave below when that command is enabled. You can try the link I posted to see if that will work but if it doesn't, not much you can do.
        CCNA, CCNA-Security, CCNP
        CCIE Security (In Progress)

        Comment


        • #5
          Re: Cisco 1800 Series, I cant get in the Rommon mod!!!!!!

          One option is to buy a new flash card for it. Then load the IOS on it and it should be fine.
          CCNA, CCNA-Security, CCNP
          CCIE Security (In Progress)

          Comment

          Working...
          X