Announcement

Collapse
No announcement yet.

ipv6 dhcpv6 (different subnets)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ipv6 dhcpv6 (different subnets)

    Hello,
    i would like to get some help on how to make a cisco router supplies addresses to different subnets connected to fastinternet interfaces using "dhcpv6"?

    here is my attempt, which is not working;

    en
    conf t

    ipv6 unicast-routing

    ipv6 local pool VLAN10-pool AAAA:1::/48 64
    ipv6 local pool VLAN20-pool AAAA:2::/48 64

    ipv6 dhcp pool DHCPv6POOL
    prefix-delegation pool VLAN10-pool
    prefix-delegation AAAA:1::23F6:33BA/64 00030001000E84244E70
    ipv6 dhcp pool DHCPv6POOL2
    prefix-delegation pool VLAN20-pool
    prefix-delegation AAAA:2::23F6:33BA/64 00030001000E84244E71

    interface FastEthernet0/0
    no sh
    no ip address
    ipv6 enable
    ipv6 address FE80::1 link-local
    ipv6 address AAAA:1::1/64
    ipv6 nd other-config-flag
    ipv6 dhcp server DHCPv6POOL

    interface FastEthernet0/1
    no sh
    no ip address
    ipv6 enable
    ipv6 address FE80::2 link-local
    ipv6 address AAAA:2::1/64
    ipv6 nd other-config-flag
    ipv6 dhcp server DHCPv6POOL2
    end

  • #2
    Re: ipv6 dhcpv6 (different subnets)

    This link may help you out.


    http://www.cisco.com/en/US/docs/ios/...html#wp1054245
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)

    Comment


    • #3
      Re: ipv6 dhcpv6 (different subnets)

      here is my topology;


      from the config, both pcs on the interfaces fa0/0 and fa0/1 are getting the same prefix delegation assigned to interface fa0/0 on the router.
      Attached Files

      Comment


      • #4
        Re: ipv6 dhcpv6 (different subnets)

        This may help you out:

        https://learningnetwork.cisco.com/thread/10339
        CCNA, CCNA-Security, CCNP
        CCIE Security (In Progress)

        Comment

        Working...
        X