Announcement

Collapse
No announcement yet.

RADIUS Authentication

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RADIUS Authentication

    Hi,

    Im having trouble getting a Cisco 881W to authenticate with my RADIUS server. Other APs work fine but I cant get it to authenticate on the routers. When I try to connect, I get the following message:

    DOT11-7-AUTH_FAILED: Station 0000.1111.2222 Authentication failed

    Debug Radius gives me the following:

    Sep 28 13:27:38: RADIUS/ENCODE(00000023):Orig. component type = DOT11
    Sep 28 13:27:38: RADIUS: AAA Unsupported Attr: ssid [265] 13
    Sep 28 13:27:38: RADIUS: 4D 69 6E 64 41 75 73 74 72 61 6C [Min
    dAustral]
    Sep 28 13:27:38: RADIUS: AAA Unsupported Attr: interface [157] 3
    Sep 28 13:27:38: RADIUS: 32 [2]
    Sep 28 13:27:38: RADIUS(00000023): Config NAS IP: 192.168.28.40
    Sep 28 13:27:38: RADIUS/ENCODE(00000023): acct_session_id: 35
    Sep 28 13:27:38: RADIUS(00000023): Config NAS IP: 192.168.28.40
    Sep 28 13:27:38: RADIUS(00000023): sending
    Sep 28 13:27:38: RADIUS/DECODE: No response from radius-server; parse response;
    FAIL
    Sep 28 13:27:38: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);
    parse response; FAIL

    The shared secret is correct and I can ping the radius server, not sure why its saying 'No response'.

    Can anyone shed some light on this for me?
Working...
X