Announcement

Collapse
No announcement yet.

Routing Problem with Cisco 892 Router

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Routing Problem with Cisco 892 Router

    hello everybody, i'm now facing problem with cisco 892 router...

    i've two network, one is 172.30.50.0/255.255.255.0 and another is 192.168.1.0/255.255.255.0.
    i want to get routing between this two network with cisco 982 router.
    892 router has 2 WAN interfaces, Fe8 & Ge0.
    so i configured Fe8 with 172.30.50.101 / 255.255.255.0
    then i put Ge0 with 192.168.1.101 / 255.255.255.0 ...
    after that, i call show ip route and displayed like as below

    Router01#show ip route
    Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
    D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
    N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
    E1 - OSPF external type 1, E2 - OSPF external type 2
    i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
    ia - IS-IS inter area, * - candidate default, U - per-user static route
    o - ODR, P - periodic downloaded static route, + - replicated route

    Gateway of last resort is not set

    172.30.0.0/16 is variably subnetted, 2 subnets, 2 masks
    C 172.30.50.0/24 is directly connected, FastEthernet8
    L 172.30.50.101/32 is directly connected, FastEthernet8
    192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
    C 192.168.1.0/24 is directly connected, GigabitEthernet0
    L 192.168.1.101/32 is directly connected, GigabitEthernet0


    my question is why Fe8 interface subnetted with 172.30.50.101/32???
    also for Ge0 interface ... how can i fix this??
    how to configure to get routing between this two networks??

    plz help me!!!!!!!!!
    Last edited by h2kh2k; 14th September 2011, 04:22.

  • #2
    Re: Routing Problem with Cisco 892 Router

    Just an FYI: The later releases of IOS (like 15.x) display the interface ip address as /32 (L=local) in addition to the network prefix (C=connected) when using "show ip route". Basically, its saying that the entries marked with "L" are reachable via the displayed interface. In previous IOS releases, the interface IP address (/32) was simply hidden when using "show ip route".

    Could be a type-o, but in the first part of your post, you stated interface G0 was configured with an IP address of 192.168.1.1/24. Based on the output of "show ip route", its actually configured with 192.168.1.101/24.

    Just as long as the hosts connected to the g0 and f8 interfaces have their default gateway set to the corresponding "L" ip address, the router should route between the interfaces. In your case, 172.30.50.101 and 192.168.1.101.

    If you want to verify your interface configuration, type:

    show run int f8
    show run int g0

    -and-

    show int f8
    show int g0

    Comment


    • #3
      Re: Routing Problem with Cisco 892 Router

      Originally posted by scowles View Post

      Could be a type-o, but in the first part of your post, you stated interface G0 was configured with an IP address of 192.168.1.1/24. Based on the output of "show ip route", its actually configured with 192.168.1.101/24.
      sorry, wrong typed i fixed my post .... i configured with 192.168.1.101/24 on G0 interface ...

      Comment

      Working...
      X