Announcement

Collapse
No announcement yet.

How to connect to this device

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to connect to this device

    I have a remote switch that i need to connect to i don't have the ip of this device. i can see the device by cdp neighbor but in its details there is no management ip. this device has snmp configured on it is there any way that i can configure the management ip using snmp.

  • #2
    Re: How to connect to this device

    If there is an SNMP write community enabled, then yes, you should be able to configure the device using SNMP.

    Comment


    • #3
      Re: How to connect to this device

      yes SNMP write community is enabled but how it can be done?

      Comment


      • #4
        Re: How to connect to this device

        Have you reviewed the info available via snmp? You can use snmpwalk or something similar to poll the available snmp data on the device to see if you can get the management IP in this data set?

        As for how to use snmp to change configuration of the device, try

        Comment

        Working...
        X