Announcement

Collapse
No announcement yet.

I can not enable PBR on interface vlan

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I can not enable PBR on interface vlan

    How about friends?, in days past I put a post where you asked, because I could not enable PBR on my switch 3560 with ios c3560-ipbase-mz.122-25.SEE2, the reason is that it should have a ios c3560-ipservicesk9-mz.122-55.SE1.bin. Download it, update the ios and started to set, when I try to enable the ip policy route-map pbr, accepts the command but never get to see the show run the line at the interface, which is a vlan.

    Any idea what is happening.

    This is part of my setup:

    l3-core#show route-map
    route-map webcache-redirect, permit, sequence 10
    Match clauses:
    ip address (access-lists): webtraffic
    Set clauses:
    ip next-hop 192.168.10.1
    Policy routing matches: 0 packets, 0 bytes
    route-map webcache-redirect, permit, sequence 20
    Match clauses:
    Set clauses:
    Policy routing matches: 0 packets, 0 bytes

    Extended IP access list webtraffic
    10 deny tcp host 192.168.10.1 any eq www
    20 permit tcp host 192.168.2.10 any eq www
    30 permit tcp host 192.168.2.11 any eq www

    interface Vlan2
    description INFORMATICA
    ip address 192.168.2.254 255.255.255.0
    ip helper-address 192.168.10.9
    ip helper-address 192.168.10.40
    !

    In this interface I should see

    ip policy route-map webcache-redirect

  • #2
    Re: I can not enable PBR on interface vlan

    Did you active the sdm prefer routing and rebooted the switch?

    Comment


    • #3
      Re: I can not enable PBR on interface vlan

      I have the default template.

      If I change the routing template does not affect me that I have vlans settings

      Comment

      Working...
      X