Announcement

Collapse
No announcement yet.

routing between vlans Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • routing between vlans Question

    Hello All

    I have been testing this for a while, I have a few questions. I have a hp Switch 2910 I have split this up into 4 Vlans. I added a mac address to windows server 2003 dchp of 192.168.1.220 of switch A and 192.168.1.221 Switch B. vlan 1 works. I have enable ip routing, do i need to add a route 0.0.0.0 0.0.0.0 (back to our gateway of 192.168.1.1? I get invaild input

    I get Show IP route entries
    Dest - Gateway - vlan - type - subtype - metric - dist
    127.0.0.0/8 reject statis 0 0
    127.0.01.1/32 lo0 connected 1 0
    172.16.8.0/25 dmz 100 connected 1 0
    192.168.1.0/24 Test Vlan 1 connected 1 0

    Switch A Config
    Running configuration:

    ; J9147A Configuration Editor; Created on release #W.14.38

    hostname "TestSwitchoffice"
    module 1 type J9147A
    mirror-port 1
    ip routing
    vlan 1
    name "Test Lan"
    untagged 1-12
    ip address dhcp-bootp
    tagged 48
    no untagged 13-47
    exit
    vlan 100
    name "DMZ"
    untagged 37-47
    ip address 172.16.8.1 255.255.255.128
    tagged 48
    exit
    vlan 20
    name "Voip"
    untagged 13-24
    ip address 192.168.42.1 255.255.255.0
    exit
    vlan 30
    name "UP Lan"
    untagged 25-36
    ip address 10.22.30.1 255.255.255.0
    exit
    interface 40
    monitor
    exit
    banner motd "This is a private system maintained by the Test Corporation"
    snmp-server community "public" unrestricted
    snmp-server contact "Admin" location "Masta Office BoxRoom"
Working...
X