Announcement

Collapse
No announcement yet.

Register cisco to asterisk

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Register cisco to asterisk

    Hello,
    I am new with cisco routers and i need help with the following topology
    Scenario is:
    PBX-->cisco router 1--> MPLS network -->cisco router 2-->sip server.
    I have issues trying to register cisco router to the SIP server (asterisk).
    There is network connectivity between cisco router 1 and sip server.(replies to ping)
    The conf is:
    dial-peer voice 78 voip
    application session
    destination-pattern 78.....
    session protocol sipv2
    session target ipv4:10.1.1.100:5060
    session transport udp
    dtmf-relay rtp-nte
    codec g729b8
    clid strip
    no vad
    !
    !
    !
    sip-ua
    authentication username cisco password 12345678
    retry invite 3
    retry response 3
    retry bye 3
    retry cancel 3
    timers trying 1000
    registar ipv4:10.1.1.100:5060 expires 3600
    sip-server ipv4:10.1.1.100:5060

    where might be the wrong at this congf?
    If i also want to forward 78 should i also put the command "no digit strip"?
    What does "clid strip" means?
    Thanks
Working...
X