Announcement

Collapse
No announcement yet.

Call Manager register fxs port with voice gateway- problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Call Manager register fxs port with voice gateway- problem

    I have a CUCM 6 and a Voice Gateway V224. I've configured the voice gateway's voice FXS ports as MGCP.
    I have a Voip connected and registered to the CUCM and a Pots phone connected to the Voice Gateway.
    If i dial from the Voip to the Pots phone it rings. The problem is that i cannot ring from the Pots to the Voip phone.
    I have no dial tone.
    If i write no shut down on the voice port i have a tone. If i configure mgcp on the voice port i have a busy ringtone.
    I've entered no mgcp and mgcp commands and i've reset the voice gateway.
    How can i call from the pots to the voip phone?
    The ios version on the voice gateway is Version 12.4(22)T4.
    Here is an outghtput from the Voice gateway.

    ccm-manager mgcp
    ccm-manager fax protocol cisco
    ccm-manager music-on-hold
    ccm-manager config server 10.1.1.33
    ccm-manager config
    !
    mgcp
    mgcp call-agent CCMIOSS 2427 service-type mgcp version 0.1
    mgcp rtp unreachable timeout 1000 action notify
    mgcp modem passthrough voip mode nse
    mgcp package-capability rtp-package
    mgcp package-capability sst-package
    no mgcp package-capability res-package
    no mgcp timer receive-rtcp
    mgcp sdp simple
    mgcp validate domain-name
    mgcp rtp payload-type g726r16 static
    !
    mgcp profile default
    timeout tone busy 600
    timeout tone dial 600
    !
    !
    !
    dial-peer voice 999223 pots
    service mgcpapp
    port 2/23
    !
    dial-peer voice 999222 pots
    service mgcpapp
    port 2/22
    !
    dial-peer voice 999888 pots
    service mgcpapp
    port 2/23
    !
    The CUCM 6 is registered with the voice gateway.

  • #2
    Re: Call Manager register fxs port with voice gateway- problem

    May want to run some debugs and look at the output.
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)

    Comment


    • #3
      Re: Call Manager register fxs port with voice gateway- problem

      Is the FXS port on the VG configured in CCM?
      CCNA, CCNA-Security, CCNP
      CCIE Security (In Progress)

      Comment

      Working...
      X