Announcement

Collapse
No announcement yet.

Help with RIP v2

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with RIP v2

    Hi I have a question about setting up RIP V2 with VLSM WITH NO AUTO SUMMARIZATION. My network looks like this:




    Here are the networks I want to set up with their network commands.

    R1- 400, 15, 80

    400- 172.16.0.0 - 172.16.1.255 network 172.16.0.0 255.255.254.0

    80- 172.16.2.0 - 172.16.2.127 network 172.16.2.0 255.255.255.128

    15- 172.16.2.128 - 172.16.2.159 network 172.16.2.128 255.255.255.224


    R2- 65, 40, 38, 20

    65- 172.17.0.0 - 172.17.0.127 network 172.17.0.0 255.255.255.0

    40- 172.17.0.128 - 172.17.0.191 ""

    38- 172.17.0.192 - 172.17.0.255 ""

    20- 172.17.1.0 - 172.17.1.31 network 172.17.1.0 255.255.255.224

    R3- 200, 150, 80

    200- 172.18.0.0 - 172.18.0.255 network 172.18.0.0 255.255.254.0

    150- 172.18.1.0 - 172.18.1.255 ""

    80- 172.18.2.0 - 172.18.2.127 network 172.18.2.0 255.255.255.128


    R4- 80, 50, 12, 10

    80- 172.19.0.0 - 172.19.0.127 network 172.19.0.0 255.255.255.128

    50- 172.19.0.128 - 172.19.0.191 network 172.19.0.128 255.255.255.255

    12- 172.19.0.192 - 172.19.0.207 network 172.19.0.192 255.255.255.240

    10- 172.19.0.208 - 172.19.0.223 network 172.19.0.208 255.255.255.240


    So I went to router 1: user enabled mode, config terminal

    Then I typed:
    router rip
    version 2
    network 172.16.0.0 255.255.254.0

    It said invalid marker starting at the 255.

    So what am I doing wrong?

    Thanks,

    -Sawx
    Last edited by redsox83381; 18th February 2010, 23:29.

  • #2
    Re: Help with RIP v2

    Enter:

    Code:
    router rip
    version 2
    no auto-summary
    network 172.16.0.0
    You can't enter subnets into the network command.
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment


    • #3
      Re: Help with RIP v2

      Originally posted by Dumber View Post
      Enter:

      Code:
      router rip
      version 2
      no auto-summary
      network 172.16.0.0
      You can't enter subnets into the network command.
      Then how will it know what subnet it resides on? I'm not using auto-summary...

      Comment


      • #4
        Re: Help with RIP v2

        RIP v2 will obtain mask information by matching the route entered to an interface with the corresponding network. It will use that mask as the mask for the subnet. You cannot enter it manually.

        Comment

        Working...
        X