Announcement

Collapse
No announcement yet.

Setup VPN with SR520 router - help needed ASAP

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Setup VPN with SR520 router - help needed ASAP

    Need help ASAP.

    Does anyone know how to create a site-to-site VPN using a Cisco SR520 router?

    I cannot use the Cisco Config utility as it will not connect to the router. I must use the commands.

    It is a PreShared key Authentication method, IKE encryption scheme, AES-256. Let me know what else you need.


  • #2
    Re: Setup VPN with SR520 router - help needed ASAP

    does this page give you any help or hints at all ?

    http://www.experts-exchange.com/Soft..._25048713.html

    To get the web interface working, you probably need "ip http server" as a configuration option. That should then enable the web services for config utility

    (I should note that i'm guessing here - I know this will work on an 877.. so it should work on a SR520)
    Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

    Comment


    • #3
      Re: Setup VPN with SR520 router - help needed ASAP

      No that doesnt help as I need to know the commands to enter in what order.

      The router doesnt have a web interface as far as I'm aware, you have to set it up using commands or the cisco config utility

      Comment


      • #4
        Re: Setup VPN with SR520 router - help needed ASAP

        hint:
        all those things in that config file, are commands that can be entered.

        hint #2:
        conf t

        hint #3
        you may be better off paying a network specialist to do this for you, or start reading the cisco training manuals..
        Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

        Comment


        • #5
          Re: Setup VPN with SR520 router - help needed ASAP

          I have tried that. I am now running out of time and need to set this up soon.

          I just need to speak to someone that knows how to set these things up for some direction on the commands I enter

          Comment


          • #6
            Re: Setup VPN with SR520 router - help needed ASAP

            the other option would be to use your cisco support contract...
            Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

            Comment


            • #7
              Re: Setup VPN with SR520 router - help needed ASAP

              I dont have a Cisco support contract.

              just need help with the commands. If there's anyone that knows how to set these up please let me know.

              Comment


              • #8
                Re: Setup VPN with SR520 router - help needed ASAP

                I have found this guide

                http://www.cisco.com/en/US/docs/ios/...html#wp1054192

                But not sure of what commands I should be entering. there are several blocks there

                Comment


                • #9
                  Re: Setup VPN with SR520 router - help needed ASAP

                  I think the article is quite clear?
                  Marcel
                  Technical Consultant
                  Netherlands
                  http://www.phetios.com
                  http://blog.nessus.nl

                  MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
                  "No matter how secure, there is always the human factor."

                  "Enjoy life today, tomorrow may never come."
                  "If you're going through hell, keep going. ~Winston Churchill"

                  Comment

                  Working...
                  X