Announcement

Collapse
No announcement yet.

Vlan

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vlan

    dear proffessionals in VLAN please help ...

    i have 3 switches 2 power connect 6224 and 1 cisco 3750

    i need tom make VLAN on 3 switches for example VLAN 1 which 3 switches cann access it as same VLAN

    please help
    samer Sulaiman

  • #2
    Re: Vlan

    You need to create on every switch the desired VLANs with the same VLAN ID (number). After that, you need to create a so called trunk (a 802.1q link) for the links that interconnects the switches. For example, on Cisco Catalyst :
    Code:
    Sw>enable
    Sw#conf t
    Sw(config)#interf f3/0
    Sw(config-if)#switchport mode trunk
    Sw(config-if)#switchport trunk encapsulation dot1q
    Sw(config-if)#switchport trunk allowed vlan all
    if you want to allow only a certain number of vlans, replace the last line with something like this :
    Code:
    Sw(config-if)#switchport trunk allowed vlan 1,1002-1005,5,10,20

    Comment

    Working...
    X