Announcement

Collapse
No announcement yet.

Cisco Catalyst 2950 does not start

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco Catalyst 2950 does not start

    I got a Cisco Catalyst 2950 from a friend who just said " it just does not work".
    I am trying to revive it.
    I plugged in the serial cable and the power cord.. but nothing happen.
    I rebooted it while pressing the MODE button. this helps some times (not usually).
    When it works I get the "switch:" prompt though I can't enter any command and the switch reboots it self....
    Most of the time I can't connect trough serial (off course I know the terminal settings).
    The LEDs in front of the machine are acting as follows:
    the STAT keeps blinking
    The SYST LED turns from amber to green.
    When the SYST LED turns green all the other LED's are lit.
    The LED's keep looping through this sequence.
    I opened the box fearing a fan problem, it was not connected, I reconnected it but this didn't help.

    Does any one have any ideas ?

  • #2
    Re: Cisco Catalyst 2950 does not start

    Hi,

    Have a look at this for LED troubleshooting: http://www.cisco.com/en/US/docs/swit...html#wp1015583

    Cheers
    Caesar's cipher - 3

    ZKHQ BRX HYHQWXDOOB GHFLSKHU WKLV BRX ZLOO UHDOLVH LW ZDV D ZDVWH RI WLPH!

    SFX JNRS FC U6 MNGR

    Comment

    Working...
    X