Announcement

Collapse
No announcement yet.

Problem installaing an HWIC-1FE

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem installaing an HWIC-1FE

    Hi Guys,

    I have a Cisco router 2800 series, and I'm having a problem while trying to install an HWIC-1FE.

    After i read some Cisco articles i got the impression that i need to verify the following:
    * IOS of 12.4(11)XW4 or 12.4(20)T --> Checked!
    * Use the first slot for an HWIC --> Checked! i used slot 0.

    Here is what i get:
    Router#sh ip int br
    Interface IP-Address OK? Method Status Prot
    ocol
    FastEthernet0/0 unassigned YES unset administratively down down

    FastEthernet0/1 unassigned YES unset administratively down down

    * no new port available...

    and here is the problem:
    Router(config)#network-clock-participate wic 0
    WIC slot is empty or does not support clock participate
    Router(config)#

    Although i connected the HWIC to port 0, the Router sais: " WIC slot is empty or does not support clock participate"

    I looked everywhere at Cisco website, and a couple of forums, but didn't find any helpful answers...

    Waiting for your response.
    Thanks in advance...

    BR,
    Shishos
    Last edited by shishos; 24th December 2008, 16:32. Reason: misspelled
Working...
X