Announcement

Collapse
No announcement yet.

Ipsec nat public to public

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ipsec nat public to public

    My access list for crypto map is like this one:

    access-list 102 permit ip host 211.200.x.x 194.68.x..x 0.0.0.63

    In fact my interesting traffic is composed of public addresses.

    Nat operation is configured on the router. I presume that I have to translate 211.200.x..x (my server) in 192.168.z.z by adding the following command in my config cisco file:

    ip nat inside source static 192.168.z.z 211.200.x..x

    According to the order of operation:http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080133ddd.shtmlnat incuded will work as expected?Nat command seems to be simple but I wish to include a form of access-list:ip nat inside source static 192.168.z.z 211.200.x..x router-map mymap


    Is that map has to be the same as the above access list?
    I do not want to interfere with the rest of nat operations in giving access to internet
Working...
X