Announcement

Collapse
No announcement yet.

Cisco Switching

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco Switching

    Okay guys, I just would like to say hello and begin explaining my problem then add more technical information as it is requested.

    I have 3 VLANS configured on one of my Cisco switches, with the following subnets:

    10.10.95.0
    10.10.97.0
    10.10.98.0

    I have a default router with the IP 10.10.97.1, and a secondary router with the IP 10.10.97.6.

    I go to the 10.10.98.0 subnet, I can ping 10.10.97.1 and also connect to server IP addresses on the 10.10.97.0 subnet via RDP etc.

    I cannot ping 10.10.97.6 from the 10.10.98.0 subnet. What could be the cause for this?

  • #2
    Re: Cisco Switching

    Layer 2 or Layer 3 switch?
    Anyhow you have to configure Inter-Vlan routing.
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment

    Working...
    X