Announcement

Collapse
No announcement yet.

VPN Interface Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • VPN Interface Question

    Hi folks

    Have a question in relation to setting up a VPN on a Cisco 1721
    I have the VPN up and running currently, and this was configured using the SDM
    During the config I had to choose the interface the VPN listens on, so choose Dialer0 as per usual
    We have a static IP pool assigned from our ISP - 81.138.x.x/48
    None of these IP's are assigned to the Dialer0 interface though, this interface picks up a dynamic ip everytime it connects/disconnects.

    My question is - how do I get the VPN to use one of our static IP's rather that the Dialer0 interface?
    Note none of the static IP's are actually assigned to an interface at all, they just are NAT'd to internal 192.168.x.x IP's

    Thanks
    Shane
Working...
X