Announcement

Collapse
No announcement yet.

configure RIPv2 and EIGRP protocol to talk each other

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • configure RIPv2 and EIGRP protocol to talk each other

    Hi there, Could someone help me with this please?
    I want to know how to configure routers to be able to communicate RIPv2 and EIGRP each other. For example, take a look the following topology, there are R1,R2,R3 and R1 and R2 use RIPv2 and R3 uses EIGRP.
    What I want to do is to be able to ping from PC A to B and C and vice versa. And this is the point i don't knw how to do. I have done RIPv2 configuraion on R1 and R2, plus EIGRP on R3. But how to do it to be able to talk RIPv2 and EIGRP each other?
    Here is topology, Thanks so much.

  • #2
    Re: configure RIPv2 and EIGRP protocol to talk each other

    Have a lookt at this:
    http://www.cisco.com/en/US/tech/tk36...80093fd9.shtml
    http://www.ciscopress.com/articles/a...27839&seqNum=7

    There are a lot of more examples if you search for redistributing <protocols>
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment


    • #3
      Re: configure RIPv2 and EIGRP protocol to talk each other

      Thanks so much,
      by the way, why am i having this error

      A_R2(config-router)#redistribute static
      A_R2(config-router)#redistribute eigrp 1
      A_R2(config-router)#passive-interface fastethernet 0/0
      A_R2(config-router)#default-metric 10
      ^
      % Invalid input detected at '^' marker.


      THANKS anyway.

      Comment


      • #4
        Re: configure RIPv2 and EIGRP protocol to talk each other

        I don't know where the ^ marker has been placed.
        Marcel
        Technical Consultant
        Netherlands
        http://www.phetios.com
        http://blog.nessus.nl

        MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
        "No matter how secure, there is always the human factor."

        "Enjoy life today, tomorrow may never come."
        "If you're going through hell, keep going. ~Winston Churchill"

        Comment


        • #5
          Re: configure RIPv2 and EIGRP protocol to talk each other

          Originally posted by Dumber View Post
          I don't know where the ^ marker has been placed.
          Sorry ... its here I used ---- to align because the '^' not placed in the right position.
          thanks so much
          A_R2(config-router)#default-metric 10
          ----------------------------^
          % Invalid input detected at '^' marker.
          Last edited by J-son; 26th October 2008, 04:46.

          Comment


          • #6
            Re: configure RIPv2 and EIGRP protocol to talk each other

            You are writing Default-metric, but according the first document you should do it wihout the dash (-)
            Marcel
            Technical Consultant
            Netherlands
            http://www.phetios.com
            http://blog.nessus.nl

            MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
            "No matter how secure, there is always the human factor."

            "Enjoy life today, tomorrow may never come."
            "If you're going through hell, keep going. ~Winston Churchill"

            Comment


            • #7
              Re: configure RIPv2 and EIGRP protocol to talk each other

              So sorry, my bad, the arrow is pointed under metric.
              Thanks so so much, anyway.
              Code:
              A_R2(config-router)#redistribute static
              A_R2(config-router)#redistribute eigrp 1
              A_R2(config-router)#passive-interface fastethernet 0/0
              A_R2(config-router)#default-metric 10
                                          ^
              % Invalid input detected at '^' marker.

              Comment

              Working...
              X