No announcement yet.

Dual DSL routers on PIX 501

  • Filter
  • Time
  • Show
Clear All
new posts

  • Dual DSL routers on PIX 501

    I would like some ideas on how to (if possible) configure two DSL routers on a cisco pix 501.

    Our original DSL connection is only 1 meg so we added another. i changed the default gateway of some users to the second router which is attached to the switch port on the 501. that works fine and they could connect to the internet the only problem is that because it is connected to the switch port they are not being NAT'd through the firewall.

    I have made an attempt at a configuration to allow this but it did not work.

    I have attached a basic diagram of the current configuration.

    Any ideas welcome.
    Attached Files