Announcement

Collapse
No announcement yet.

How to open ports on cisco 827 for webserver

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to open ports on cisco 827 for webserver

    How do you open ports on a cisco router for web server...


    what i have done so far is as follows


    I can ping my WAN IP address from outside my network (maybe because its static)
    I can ping the web address www.mysitename.com (could be same as above)
    BUT
    I cant access the website.
    when i do
    telnet mysite.name.com 80
    it cant find it


    I have added these two commands into my router

    ip nat inside source static udp 192.168.1.10 53 192.168.5.5 53
    ip nat inside source static tcp 192.168.1.10 80 192.168.5.5 80

    And still cant access the sites from the internet

    Here is my set up

    ..........................Internet
    ............................"
    ..........................."wan ip address
    ............................"
    ............................ADSL modem
    ............................"192.168.1.1
    ........................"(static ,no dhcp from adsl to firewal)
    .........................."192.168.1.10
    ...........................Firewall Machine(with 2 NIC)
    .........................."192.168.5.5
    .............................".................... ..............................."
    .............................".................... ................................"
    .....................192.168.5.6 (Server)(static ip address)

    What am i doing wrong on missing?

    Thanks
Working...
X