Announcement

Collapse
No announcement yet.

how to enable tcp port 5631 5632

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • how to enable tcp port 5631 5632

    Hello All,

    Actually I have two routers each connected leased line. I need to enable pcanywhere tcp port and udp port on the router.

    I am lost with the ACL extended list. Actually someone from outside need to access a pc on the lan. Router 1 - 10.2.19.1 Router 2 - 10.2.20.1

    Can some help me to enable this port 5631.

  • #2
    Re: how to enable tcp port 5631 5632

    This may be a help
    http://www.cisco.com/en/US/products/...800a5b9a.shtml

    I can tell you on the pix/asa but not sure on routers.

    Might be good to post the configs (minus personal info) so someone can have a look.
    cheers
    Andy

    Please read this before you post:


    Quis custodiet ipsos custodes?

    Comment


    • #3
      Re: how to enable tcp port 5631 5632

      Give this a try:
      ip nat inside source static tcp <inside ip> <port> <outside ip> <port>
      CCNA, Network+

      Comment


      • #4
        Re: how to enable tcp port 5631 5632

        Hi can you please type the correct command I am really stuck

        Regards

        Comment


        • #5
          Re: how to enable tcp port 5631 5632

          Well let me explain

          Router 1 - 10.2.19.1 f0/0
          192.168.24.23 s0/0


          Router 2 - 10.2.20.1 f0/0
          192.168.24.24


          Router 2 last gatway is 10.0.0.32 which is my ISA. When I do pcanywhere it arrives up to the ISA but it cannot find the host computer 10.2.20.97.

          I need to allow 5631 on the router 1 10.2.19.1 and also use port forwarding to forward traffice 5631 to host computer 10.2.20.97

          Help

          Comment

          Working...
          X