Announcement

Collapse
No announcement yet.

Help with Cisco Pix 525

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with Cisco Pix 525

    All,

    Trying to configure a pix-525 I have a segment at work that only has one box on it. I can't touch it though. I'd like to connect a few servers (backend stuff) so I can get to them via the internal network. I'd like to have two nat pools set up for Lights Out stuff and server connection stuff. I was hoping to use vlans to split the two off.

    Here is the config I'm hoping to implement

    149.132.13.0 /24

    Going to 10.132.13.160/27 and 10.132.13.192/27

    I can do it via making a one to one nat but would like to nat the whole 10.132.13.160/27 to 149.132.13.160/? and 10.132.13.192/27 to 149.132.13.192/?

    Any ideas on how to config this would be great as I'm getting no where with it....

    Cheers

    John
Working...
X