Announcement

Collapse
No announcement yet.

Fortinet DMZ Issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fortinet DMZ Issue

    In Cisco I would setup a static route for this and be done with it but here it's different...

    I have a Fortinet 200A and the setup is like this at the moment:
    Internal network is 192.168.1.x and Natted through WAN1 correctly with the main REAL Ip address. For the sake of the discussion letís call the real IP X.X.X.50.
    I have 3 more REAL Ip addresses that I want to assign to three different servers.
    These servers are 10.10.10.11-13 and they are connected to DMZ1 on the 200A which is 10.10.10.1
    My wish is to have:
    10.10.10.11 use the real IP X.X.X.51
    10.10.10.12 use the real IP X.X.X.52
    10.10.10.13 use the real IP X.X.X.53
    What should I do?


    Thanks for your help.
    Visit iCount
    Visit MSEC
    Visit LCS-GUIDES.COM
    Visit Melariche

  • #2
    Re: Fortinet DMZ Issue

    this might help:
    http://kc.forticare.com/default.asp?id=1765&Lang=1
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment

    Working...
    X