Announcement

Collapse
No announcement yet.

Cisco PIX 506 and PPTP VPN

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco PIX 506 and PPTP VPN

    Trying to setup a gateway-gateway VPN tunnel between two Cisco PIX 506 series devices. The current configs will only allow users to use DNS properly in one direction. From PIX B to PIX A in this case. Also noticed when making a PPTP connection to PIX A the connection does not get a DNS server; and when making a PPTP connection to PIX B the connection does not get a default gateway. What part of the configuration is responsible for assigning the session's IP information?

    See the attached document which shows the results of IPCONFIG /ALL when connected to either PIX device via PPTP.

    Please advise...
    Attached Files
Working...
X