Announcement

Collapse
No announcement yet.

how to start HDLC

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • how to start HDLC

    i NEED TO KNOW HOW TO START
    commands to start the HDLC

    IN THE CISCO 1841

    THANKS

  • #2
    Re: how to start HDLC

    HDLC Definitions:
    High-Level Data Link Control
    Cisco HDLC

    Configuring Cisco HDLC
    Cisco HDLC Configuration Tasks

    Configuration: Basic Software Configuration Using the Setup Facility
    ** Remember to give credit where credit is due and leave reputation points where appropriate **

    Comment


    • #3
      Re: how to start HDLC

      HDLC is the defaut WAN encapsulation on Cisco routers... you can issue the following commands to be sure it is activated.

      Router>en
      Router#conf t
      Router(config)#int S0/0 (or whatever interface your router has)
      Router(config-if)#en hdlc
      Router(config-if)#end
      Router#sh int S0/0

      You should see on the first lines of output:

      "Encapsulation HDLC, loopback not set"

      Comment

      Working...
      X