Announcement

Collapse
No announcement yet.

Routing on MPLS VPN with 2800's

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Routing on MPLS VPN with 2800's

    Ok..heres what's happening,
    Installing a new VOIP phone system so we set up an MPLS with the carrier. We have 2800 series routers with Vwic cards multilinked on each end. Using BGP via carrier recommendation. I can ping every interface on both sides when in the router. However i cannot ping to the LAN on either end. put i can ping the LAN interface on the cisco. Oh, forgot to add..on the MDC side, i have a Sonicwall firewall that handles internet and p2p VPN with a few other locations. So, i turned RIP on sonicwall for all the interfaces and turned RIP on both Ciscos. Wondering how to build these routes so that each side can see the the opposite LAN...heres my config summarized


    DIVISION OFFICE

    Gateway of last resort is 192.168.10.1 to network 0.0.0.0

    70.0.0.0/32 is subnetted, 1 subnets
    R 70.61.233.240 [120/1] via 192.168.10.1, 00:00:25, FastEthernet0/0
    R 192.168.30.0/24 [120/1] via 192.168.10.1, 00:00:25, FastEthernet0/0
    R 192.168.8.0/24 [120/1] via 192.168.10.1, 00:00:25, FastEthernet0/0
    C 192.168.10.0/24 is directly connected, FastEthernet0/0
    R 192.168.11.0/24 [120/1] via 192.168.10.1, 00:00:25, FastEthernet0/0
    67.0.0.0/32 is subnetted, 2 subnets
    B 67.17.15.144 [20/0] via 162.97.238.49, 1w3d
    B 67.17.15.130 [20/0] via 162.97.238.49, 1w3d
    162.97.0.0/16 is variably subnetted, 3 subnets, 2 masks
    C 162.97.238.49/32 is directly connected, Multilink1
    C 162.97.238.48/30 is directly connected, Multilink1
    B 162.97.125.78/32 [20/0] via 162.97.238.49, 1w3d

    FastEthernet0/0 192.168.10.24 YES NVRAM up up

    FastEthernet0/1 unassigned YES NVRAM administratively down down

    Serial0/1/0:0 unassigned YES NVRAM up up

    Serial0/1/1:0 unassigned YES NVRAM up down

    Multilink1 162.97.238.50 YES NVRAM up up


    Branch Office


    Gateway of last resort is 146.82.57.1 to network 0.0.0.0

    B 192.168.10.0/24 [20/0] via 146.82.57.1, 16:37:45
    67.0.0.0/32 is subnetted, 2 subnets
    B 67.17.15.144 [20/0] via 146.82.57.1, 16:35:40
    B 67.17.15.130 [20/0] via 146.82.57.1, 16:35:40
    162.97.0.0/16 is variably subnetted, 2 subnets, 2 masks
    B 162.97.238.48/30 [20/0] via 146.82.57.1, 16:35:40
    B 162.97.125.78/32 [20/0] via 146.82.57.1, 16:35:40
    146.82.0.0/16 is variably subnetted, 3 subnets, 2 masks
    B 146.82.72.190/32 [20/0] via 146.82.57.1, 16:35:41
    C 146.82.57.1/32 is directly connected, Multilink1
    C 146.82.57.0/30 is directly connected, Multilink1
    C 192.168.3.0/24 is directly connected, FastEthernet0/0
    S* 0.0.0.0/0 [1/0] via 146.82.57.1

    FastEthernet0/0 192.168.3.20 YES NVRAM up up

    FastEthernet0/1 unassigned YES NVRAM administratively down down

    Serial0/1/0:0 unassigned YES NVRAM up up

    Serial0/1/1:0 unassigned YES NVRAM up up

    Serial0/2/0:0 unassigned YES NVRAM up up

    Serial0/2/1:0 unassigned YES NVRAM down down

    Multilink1 146.82.57.2 YES NVRAM up up

    there is currently a sonicwall at the branch location that is currently hooked into the old T1 there. We need to remove that and have them get all internet traffic through our division 192.168.10.1 gateway.

    Thanks in advanced.

    Jason Michel

  • #2
    Re: Routing on MPLS VPN with 2800's

    there is little useful information in your description, maybe you can provide more details of both routers' configuration and topology. I like study MPLS VPN case.
    If you want to access all lans in both side,you should ensure every VRF route table has all routes of lans.

    Comment

    Working...
    X