Announcement

Collapse
No announcement yet.

Load an ios in 2500

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Load an ios in 2500

    Hi everyone,

    I have one cisco 2500 and now the ios is corrupted and i get router(boot)> so, in this i cant do anything. I downloaded ios and these steps i did and i get connection timed out

    TFTP server:10.0.0.5
    Router Gateway:10.0.0.1

    Able to ping router


    1. Connected the comp to transceiver(cross cable i used)
    2.Connected com port to console of router
    3.Enterred into router terminal and i get an router boot
    4.Downloaded Pumpkin tftp server
    5.Saved the ios is tftp server
    6.Then enterred into router terminal
    Done these steps:
    Router(boot)>En
    Router (boot)#config ter
    Router(boot)config-if---int eth 0
    ip add 10.0.0.1 255.0.0.0
    no sh


    Ping 10.0.0.5-----replies

    Copy tftp flash
    remote host:10.0.0.5
    source file c250-i-l.212.27b.bin
    destination same

    Erase flash yes
    loading cisco.cfg----timed out
    Loading ios ----timed out

    what shall i do ? Any ideas will be great help for me


    phanidhar

  • #2
    Re: Load an ios in 2500

    I don't know if the obvious is the answer but in your post the image name is certainly incorrect. Do you have enough flash?

    Comment

    Working...
    X