Announcement

Collapse
No announcement yet.

VLAN's on Aironet 1241

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • VLAN's on Aironet 1241

    I need a little help with configuration, here is my setup.
    - Catalyst 4006 with 3 VLAN's
    VLAN1: 10.5.0.0/21 (Corp)
    VLAN2: 10.5.9.0/24 (IT)
    VLAN3: 10.5.99.0/24 (VISITORS)

    - I installed Airnet 1241 AP and with a straight through cable connected it to a VLAN1 port.
    - Created 3 VLAN's on the AP with 3 SSID's. VLAN's match the VLAN's on the Catalyst 4006 switch.
    VLAN1: SSID(cbo)
    VLAN2: SSID(it)
    VLAN3: SSID(visitors)

    - Now here are my issues:
    1- I configured WPA II Enterprise on the first two SSID's but I can only connect to them with a Cisco Card, having trouble connecting to them with other third party client adapters.

    2- I want the visitors to be able to connect without any trouble.

    3- When I connect to the first SSID which is on VLAN1 with the cisco card I can get the IP and I can go out on the network but I can't get the IP when I connect to 2nd or 3rd SSID.

    4- I did use the ip helper command in each VLAN for the dhcp server.


    I am assuming problem is with the way I have the AP connected to the Catalyst 4006 switch. Any ideas will be greatly appreciated. As it is critical for me to get this up and running at work.

  • #2
    Re: VLAN's on Aironet 1241

    Wow all the intelligent people in here and no one had a word to say about this . Its cool I figured it out on my own.

    Comment


    • #3
      Re: VLAN's on Aironet 1241

      Since your AP is configured to provide access to 3 VLANs , it must be connected to a trunk port of your Cisco Cathalyst 4600.
      Last edited by netxt; 23rd January 2008, 16:11.
      Regards,
      Csaba Papp
      MCSA+messaging, MCSE, CCNA
      ...............................
      Remember to give credit where credit is due and leave reputation points where appropriate
      .................................

      Comment


      • #4
        Re: VLAN's on Aironet 1241

        Originally posted by usits View Post
        Wow all the intelligent people in here and no one had a word to say about this . Its cool I figured it out on my own.
        Thanks for sharing you're solution

        You know, most people has their own jobs. Everybody is trying to help in their own spare time.
        Maybe they don't have the time to respond or don't have the knowledge about aironet?

        Thinking before posting would be nice
        Marcel
        Technical Consultant
        Netherlands
        http://www.phetios.com
        http://blog.nessus.nl

        MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
        "No matter how secure, there is always the human factor."

        "Enjoy life today, tomorrow may never come."
        "If you're going through hell, keep going. ~Winston Churchill"

        Comment


        • #5
          Re: VLAN's on Aironet 1241

          Dude calm down I was joking not bashing any one.

          Comment


          • #6
            Re: VLAN's on Aironet 1241

            Ok..
            Misunderstanding then

            Oh, can you still post the solution. I'm quite curious about this.
            Marcel
            Technical Consultant
            Netherlands
            http://www.phetios.com
            http://blog.nessus.nl

            MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
            "No matter how secure, there is always the human factor."

            "Enjoy life today, tomorrow may never come."
            "If you're going through hell, keep going. ~Winston Churchill"

            Comment


            • #7
              Re: VLAN's on Aironet 1241

              No problem man.
              Actually the solution was pretty simple but since this is the first time I was doing it, it gave me some trouble.

              1- Get rid of ip helper commands on the AP
              2- For some reason there were two extra BVI groups on the AP BVI2 AND BVI3, they were causing the main issue. You just need one BVI1 to pass the traffic.

              Once I did that bingo every thing started working. Hope this helps some one else. Now the only issue I have is the ACL which I am working on. I will need another DHCP server for the visitor's VLAN, which is not an issue.

              Comment

              Working...
              X