Announcement

Collapse
No announcement yet.

snmp woes

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • snmp woes

    hi,

    I am attempting to enable snmp on a couple of routers and am finding some difficulty in looking at the logs

    the-router-name#sh run | include snmp
    mmi snmp-timeout 180
    snmp-server community thecommunityname RO
    snmp-server community thecommunityname2 RW
    snmp-server host 555.555.555.555 thecommunityname2 syslog snmp


    on the server running the snmp software (the same ip as the string above)- i have set up the correct snmp credentials, running snmp v1- (same as the string above), with thecommunityname2 and first tried it up for passive snmp. after not getting anything, i tried setting it up to actively poll- and still nothing.

    there are messages on the router because:

    the-router-name#sh log
    Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes,
    0 overruns)
    Console logging: level debugging, 40 messages logged
    Monitor logging: level debugging, 0 messages logged
    Buffer logging: disabled
    Logging Exception size (4096 bytes)
    Trap logging: level informational, 54 message lines logged


    the ccnp/ccna books i have touch on snmp VERY lightly, if at all and the information i got was from cisco's website-

    any help would be appreciated!

  • #2
    Re: snmp woes

    Maybe this will help:
    http://www.netcraftsmen.net/welcher/...nmprouter.html
    http://www.cisco.com/univercd/cc/td/...rt3/fcf014.htm
    http://www.cisco.com/en/US/tech/tk64...80094aa4.shtml
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment

    Working...
    X