Announcement

Collapse
No announcement yet.

Site to Site VPN Config

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Site to Site VPN Config

    Hi

    I have a Cisco Pix 501 & ASA 5505. I would like to configure site to site VPN between these 2 firewalls. I have already created a SIte to site on ASA 5505 & when I configure on Pix 501, my site to site does not WORK. Is there a compatiability issue? PLease kindly assist. Thanks alots

  • #2
    Re: Site to Site VPN Config

    nope, but are the timers and encryption equal at phase I and phase II?
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment


    • #3
      Re: Site to Site VPN Config

      Hi ,

      Both timers & encryption are the same but it still does not work. Please advise. Thanks.

      Comment


      • #4
        Re: Site to Site VPN Config

        can you post the configs?
        edit:
        Can jou start a Debug crypto ISAKMP and a Debug Crypto IPSEC and post the results here?
        Last edited by Dumber; 18th September 2007, 08:17.
        Marcel
        Technical Consultant
        Netherlands
        http://www.phetios.com
        http://blog.nessus.nl

        MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
        "No matter how secure, there is always the human factor."

        "Enjoy life today, tomorrow may never come."
        "If you're going through hell, keep going. ~Winston Churchill"

        Comment

        Working...
        X