Announcement

Collapse
No announcement yet.

Hanging two ISA servers off a Pix 506e

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hanging two ISA servers off a Pix 506e

    Hi All

    I'm afraid this may be a nother basic question for you guys but I'm still learning here.

    I have had to build a new ISA server to replace the existing one. The problem is that I need to test the new server without taking the existing one offline.

    My Pix config shows :

    ip address outside 217.46.nnn.nnn 255.255.255.nnn
    ip address inside 192.168.71.226 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm logging informational 100
    pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0 0 0
    static (inside,outside) 217.46.nnn.nnn 192.168.71.221 netmask 255.255.255.255 0 0

    The 192.168.71.221 is the existing ISA server

    would adding the following allow the other ISA server to use the internet if its IP is 192.168.71.239 at the same time as the existing server ?

    static (inside,outside) 217.46.nnn.nnn 192.168.71.239 netmask 255.255.255.255 0 0

    I have tried to look for this senario but have not found it so this is why am asking just in case it screws things on the Pix
    The Univurse is still winning!

    W2K AD, WSUS, RIS 2003. ISA also AVG Server
    ** If contributors help you, recognise them and give reputation points where appropriate **

  • #2
    Re: Hanging two ISA servers off a Pix 506e

    I resolved this .. Turns out I didn't need to do anything.

    I'm still getting my head round routing etc so please excuse if I missed the ovbious.
    The Univurse is still winning!

    W2K AD, WSUS, RIS 2003. ISA also AVG Server
    ** If contributors help you, recognise them and give reputation points where appropriate **

    Comment

    Working...
    X