No announcement yet.

access list

  • Filter
  • Time
  • Show
Clear All
new posts

  • access list

    i am quite new to this... i would appreciate some help

    i need to configure my wireless access point in such a way that it will be able to access only web services on the 10.99.x.x subnet and no other parts of the private network....

  • #2
    Re: access list

    and also if possible wireless clients should be able to access an ISP at the address


    • #3
      Re: access list

      what would the access list look like to configure all this.... i would appreciate some help


      • #4
        Re: access list

        Hi Mary23,

        Thanks for the question.

        I suppose this depends on what type of AP you have. If this were a router, here is how you would configure the ACL & Apply it:

        Router(config)#access-list 101 remark to only allow web on 10.99.x.x subnet
        Router(config)#access-list 101 remark and to allow access to
        Router(config)#access-list 101 permit tcp any eq www
        Router(config)#access-list 101 permit ip any host

        Router(config)#int e0/0
        Router(config-if)#ip acces
        Router(config-if)#ip access-group 101 in

        You would want to apply this on the interface closest to the traffic source.

        I don't have an AP handy to test creating ACL's on. In looking on the website (the ultimate Cisco documentation website), I found this on the 1200 series AP's->

        Hopefully this helps.

        David Davis - Petri Forums Moderator & Video Training Author
        Train Signal - The Global Leader in IT Video Training - Free IT Training Products
        Personal Websites: &