Announcement

Collapse
No announcement yet.

Configuring port forwarding using SDM express

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Configuring port forwarding using SDM express

    Have a cisco 837 which I have configured with Cisco's SDM express.

    All ok so far. 1 atm connection to the outside world.
    Autonegotiates the ISP provided static IP.

    Nats the one external IP to the internal private IP'd hosts no problem

    Now I want to port forward all incoming smtp - port 25 trafic to a particular internal private IP.

    Can't find the place in the SDM to do this...?
    Suggestions?

  • #2
    Re: Configuring port forwarding using SDM express

    Hi SmileyFella,

    I have SDM (not express). It sounds like you want to configure NAT to send all traffic to your single IP address inside.

    To do this in SDM, I hav attached a graphic to show where you can go to configure this. It would be in the NAT section.

    I hope this helps!

    Thanks,
    David
    Attached Files
    David Davis - Petri Forums Moderator & Video Training Author
    Train Signal - The Global Leader in IT Video Training
    TrainSignalTraining.com - Free IT Training Products
    Personal Websites: HappyRouter.com & VMwareVideos.com

    Comment

    Working...
    X