Announcement

Collapse
No announcement yet.

can i redirect a printer using tcpip port ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • can i redirect a printer using tcpip port ?

    can i redirect a printer using tcpip port ?

    i have no problem with all other ports (lpt, usb, dot).

  • #2
    Network Printer

    If the printer was setup as local printer (even it a network printer) or the TS are the printer server, then shouldnt be known problem to re-direct the printer.

    If you are using win2k as TS please review:

    http://support.microsoft.com/kb/q264039/

    http://support.microsoft.com/default...;EN-US;q245017

    Good Luck

    Yuval
    Best Regards,

    Yuval Sinay

    LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

    Comment


    • #3
      The printer have a NIC configured using IP.
      It isn't connected to a print server and local computers are configured with the printer driver using TCPIP port and the IP address of the printer.

      computers connect to a TS running on server 2003.

      when computers connect to the TS using RDP client, the printer is not rederected.

      Comment


      • #4
        Printers

        As I know, the limitation of the Network Printers mapping under Win 2003 are the same as Win 2000.
        The easy way to overcome the limitation is to use logon script that will run when the user will logon into the server.
        Best Regards,

        Yuval Sinay

        LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

        Comment


        • #5
          why you will not insall this printer on TS?

          Comment


          • #6
            because the printer is connected to lan in site1 and the computers on this lan connecting to the TS in site2.

            Comment

            Working...
            X