Announcement

Collapse
No announcement yet.

W2k3 Stadard WSUS - WXPPro x64

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • W2k3 Stadard WSUS - WXPPro x64

    I know, another post, but I hate poluting posts with my problems.

    My Setup:
    W2k3 server running WSUS on http://server_name:8530/WSUSAdmin/
    WXPPro x64

    My problem:
    The client is inserted in the WSUS group(s). I read the other post and to make sure I covered that I made an OU Clients, with sub OU x64. Then moved the computer entry to that OU. Next with properties of OU x64 - Group Policy made the new policy to my liking windows update setup. I rebooted the client, after forcing policy update. The policies aren't passed through. The adres "http://server_name:8530/WSUSAdmin/" will result in "The server requested a login authentication method that is not supported." (on the client side) and the adres "http://server_name:8530" will result on "This Virtual Directory does not allow contents to be listed." The client is running .NET framework as well (version 2b2 for x64).

    Any tips are welcome.

  • #2
    Re: W2k3 Stadard WSUS - WXPPro x64

    If you install the Microsoft Framework 2.0 manually you may have authentication porlbem becuase the client will use Framework 2.0 to connect to the WSUS server - and I dont thinking that it support this metfood - you may
    need to change the defualt Framework to 1.1 instead of 2.0.
    Also, is other clients work ok?
    Best Regards,

    Yuval Sinay

    LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

    Comment


    • #3
      Re: W2k3 Stadard WSUS - WXPPro x64

      I installed Framework 2 just yesterday, before it still didn't work. Besides that there are no other clients, I only test it at home for studying. At my work we have our own home made patch distribution.

      I also read something about configure wuau.dll, what do I need to do on that? Maybe I already did that but I', not sure

      Comment


      • #4
        Re: W2k3 Stadard WSUS - WXPPro x64

        Why you configured the GPO to use: http://server_name:8530/WSUSAdmin and not http://server_name ?

        http://www.microsoft.com/technet/pro...c6ee2dad9.mspx
        Best Regards,

        Yuval Sinay

        LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

        Comment


        • #5
          Re: W2k3 Stadard WSUS - WXPPro x64

          I meant http://server_name:8530 this because I didn't install WSUS on the default webpage. I run the server as webserver as well and didn't want WSUS as default the installation then says to use this adres. The server it self is also configured in GPO to use that adres. When it was without the port number it didn't work (on the server) so it is needed.

          Comment


          • #6
            Re: W2k3 Stadard WSUS - WXPPro x64

            Did you followed the instructions in the link that I gave you before the last note?
            Best Regards,

            Yuval Sinay

            LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

            Comment


            • #7
              Re: W2k3 Stadard WSUS - WXPPro x64

              I did that. I also put it on http://localhost for testing and that didn't work either. I made an computer group in the AD and put a policy in it. As far as I can see that isn't passed, options I filled in weren't filled in on the client, even after some boots and well over 22 hours. Any more tips?

              Comment

              Working...
              X