Announcement

Collapse
No announcement yet.

DHCP Subnetting

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DHCP Subnetting

    hey all.

    I am using DHCP service on server 2008 R2/
    the current network is 192.168.10.* subnet 255.255.255.0(computers, servers)
    i want to add new scope for our IP-phones that will use 192.168.8.* subnet 255.255.0.0.(needed for the trixbox server 192.168.10.9)
    how can i add this scope???

    Best Regards,

  • #2
    Re: DHCP Subnetting

    Just need to add a new scope on the server. Not sure how you switching/routing is but you will need a dhcp relay (On a switch or router) to relay dhcp requests to your hosts.
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)

    Comment


    • #3
      Re: DHCP Subnetting

      The subnet mask for the ip phones is overlapping with the computers. Either change the mask to /24 and set up a vlan, or change the computers to /16 (not recommended to mix with ip voice, or pick another subnet iD for voice.
      JM @ IT Training & Consulting
      http://www.itgeared.com

      Comment


      • #4
        Re: DHCP Subnetting

        thanks thanks thanks

        Comment

        Working...
        X