Announcement

Collapse
No announcement yet.

DHCP BINDing Problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DHCP BINDing Problem

    I’m using windows Server 2008 SP2 with 2 NIC and want to bind 2 DHCP for each NIC but in section “Add/Remove Bindings” , just listed one NIC.
    So I do not know how to solve this problem
    could anybody help me?
    Regards

  • #2
    Re: DHCP BINDing Problem

    Are both NICS recognised by the OS? Is one perhaps disabled, or not have its drivers installed? Are both physical NICs perhaps bonded to form one virtual interface?
    Gareth Howells

    BSc (Hons), MBCS, MCP, MCDST, ICCE

    Any advice is given in good faith and without warranty.

    Please give reputation points if somebody has helped you.

    "For by now I could have stretched out my hand and struck you and your people with a plague that would have wiped you off the Earth." (Exodus 9:15) - I could kill you with my thumb.

    "Everything that lives and moves will be food for you." (Genesis 9:3) - For every animal you don't eat, I'm going to eat three.

    Comment


    • #3
      Re: DHCP BINDing Problem

      are both nics configured and providing normal tcp/ip services ?

      Are they both on the same subnet, or separate subnets ?
      Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

      Comment


      • #4
        Re: DHCP BINDing Problem

        Originally posted by tehcamel View Post
        are both nics configured and providing normal tcp/ip services ?

        Are they both on the same subnet, or separate subnets ?
        both of them are Enable & Recognized by Server 2008
        so NICs are in different Subnet (one is 192.168... and anotherr 10.1...)
        and i afew mixed in section "Add/Remove Bindings" just one of them is listed, where is anothere NIC?!

        Comment


        • #5
          Re: DHCP BINDing Problem

          static ip addresses on both ?

          this reference article may help you out a little.
          http://technet.microsoft.com/en-us/l...8WS.10%29.aspx
          Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

          Comment


          • #6
            Re: DHCP BINDing Problem

            Originally posted by tehcamel View Post
            static ip addresses on both ?

            Thanks
            i check it again and one of them was configured dynamically

            Regards
            Last edited by UnDocumented; 11th July 2010, 17:34.

            Comment

            Working...
            X