Announcement

Collapse
No announcement yet.

EXch 2007 sp1 SCR Cluster nodes Eoor

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • EXch 2007 sp1 SCR Cluster nodes Eoor

    Recently i had migrated my Exchange servers IP's .Exchange server is working fine
    but i am getting error on passive node that "The node cannot join the server cluster" but i am able to ping both node IP as well as private IP. kindly help on this error

    Event Type: Error
    Event Source: ClusSvc
    Event Category: Node Mgr
    Event ID: 1079
    User: N/A
    Computer: BBX-MX-02
    Description:
    The node cannot join the server cluster because it cannot communicate with node BBX-MX-01 over any network configured for internal server cluster communication. Check the network configuration of the node and the server cluster.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  • #2
    Re: EXch 2007 sp1 SCR Cluster nodes Eoor

    Did you anything?

    There is this:
    http://support.microsoft.com/kb/317232
    this
    http://www.tech-archive.net/Archive/.../msg00331.html
    and this
    http://www.eggheadcafe.com/software/...atible-wi.aspx
    cheers
    Andy

    Please read this before you post:


    Quis custodiet ipsos custodes?

    Comment


    • #3
      Re: EXch 2007 sp1 SCR Cluster nodes Eoor

      But i havn't change my cluster a/c nor password....

      Comment


      • #4
        Re: EXch 2007 sp1 SCR Cluster nodes Eoor

        You mention in your other posts that you have just been through a IP re-number I believe.
        Was it all working beforehand? Explain the steps you took etc please as these are all likely related.
        cheers
        Andy

        Please read this before you post:


        Quis custodiet ipsos custodes?

        Comment


        • #5
          Re: EXch 2007 sp1 SCR Cluster nodes Eoor

          I had migrated IP address from class c to Class a for my DC as well as Exchange server.

          first i had change DC 's IP's & than i Change Exchange servers IP .
          for Exchange Mailbox server i had change exchange server IP as per below article
          http://technet.microsoft.com/en-us/l...EXCHG.65).aspx

          Since than my server is running & pinging but i am getting error of nodes..

          Comment


          • #6
            Re: EXch 2007 sp1 SCR Cluster nodes Eoor

            Andy ,
            There is one thing i forgot to mentioned that .....I had done TEAMING also.....

            Comment


            • #7
              Re: EXch 2007 sp1 SCR Cluster nodes Eoor

              Teaming is only supported on the public NICs but if you can ping at the moment that is less likely to be the issue.

              What do your network bindings show?
              Can you reboot your passive node now the active is running?
              cheers
              Andy

              Please read this before you post:


              Quis custodiet ipsos custodes?

              Comment


              • #8
                Re: EXch 2007 sp1 SCR Cluster nodes Eoor

                yes taeming is done on public nic.also i am able to ping both nodes public as well as private IP

                Also i had restart the server but on passive server cluster service is not getting started

                Comment


                • #9
                  Re: EXch 2007 sp1 SCR Cluster nodes Eoor

                  Is the firewall service enabled?
                  Any AV involved?


                  I would be tempted to shutdown the original server, restart the "working" cluster server and then startup the other server.
                  cheers
                  Andy

                  Please read this before you post:


                  Quis custodiet ipsos custodes?

                  Comment


                  • #10
                    Re: EXch 2007 sp1 SCR Cluster nodes Eoor

                    I found the Solution , under cluster admin , cluster configuration > networks,
                    Private NIC setting set to public , we reset to internal cluster communication & restart cluster services ..... it work....!!!!

                    Comment


                    • #11
                      Re: EXch 2007 sp1 SCR Cluster nodes Eoor

                      Glad it is fixed, kinda odd that you only setup teaming on the public and changed IP addresses as this shouldn't affect the setup of the private NIC as private though.
                      cheers
                      Andy

                      Please read this before you post:


                      Quis custodiet ipsos custodes?

                      Comment

                      Working...
                      X